全國咨詢熱線
雖然切丁機是一款常見的食品加工設備，且有著相應的高質量?jì)?yōu)勢，但在使用該機器設備的時候，若不注意操作手法，或者是電源方面有所異常，那么，故障和危險也就會(huì )隨時發生。
Although dicing machine is a common food processing equipment, and has the corresponding high quality advantages, but in the use of the machine equipment, if you do not pay attention to the operation technique, or the power aspect is abnormal, then the fault and danger will occur at any time.
要保證該機器設備的使用，我們可以從兩方面來注意。方面就是相應的外部條件，比如電源，機器整體系統的情況等等，這些情況的完好無損，則有利于切丁作業。
To ensure the safe use of the machine, we can draw attention from two aspects. The first is the corresponding external conditions, such as power supply, the overall system of the machine and so on. These conditions are intact, which is good for cutting operations.
第二方面，就是工作人員的操作情況了，的操作，無任何不利行為的出現，就是確保該機器設備正常，使用的好方法。
The second side, is the operation of the staff, professional operation, without any adverse behavior, is to ensure that the machine equipment is normal, the safe use of the good method.
在使用這一切丁機的時候，確保，就是以上所提到的外部條件的注意以及工作人員自操作技術的保證。當然，物料方面的情況也不得忽視。
When using all these machines, ensuring safety is the attention to the external conditions mentioned above and the guarantee from the professional operation techniques of the staff. Of course, the material situation should not be ignored.
蔬菜切丁機含有鋒利的切刀、旋轉的零件和高壓電源，更換切料規格和維修設備時，必須斷開和鎖上電源，目視確認設備已經完全停止后，方可取下蓋板和防護板，否則可能導致嚴重傷害。
The vegetable cutting machine contains sharp cutting tools, rotating parts and high voltage power supply. When the cutting specification and maintenance equipment are replaced, the power supply must be broken and locked first. After visual confirmation that the equipment has been completely stopped, the lid and the protective plate may be removed. Otherwise, it may cause serious damage.
a.拆除蓋板和防護板以便對設備的各部分進行保養
A. remove the cover and protective panels for maintenance of all parts of the equipment.
b.拆開前面板和切片導蓋，以保養切丁組件和潤滑機器。
B. disconnect the front panel and the section guide cover to maintain the chop assembly and the lubrication machine.
c.拆開上料料斗以保養切片裝置。
C. disassemble the feeding hopper to maintain the slicing device.
d.拆開切片防護板，以保養切丁組件和驅動組件。
D. dissecting slicing guard plate to maintain cutting components and driving components.
本文由切丁切塊機為您提供，我們的網站是:http://www.suantv.cn我們將以全心全意的熱情為您提供更的服務，歡迎您的訪問!
This article is provided by cheding cutting machine for you. Our website is: http://www.suantv.cn we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.
